The cold tire retreading machine-curing chamber

1)advanced design 2)effective,automatic 3)enviromental 4)well after-sale service

Tire curing chamber

1.Technical Parameters:

Temperature:110~120(°C)

Cure chamber pressure: 0.45~0.5Mpa

Inner tube pressure: 0.65~0.7Mpa

Envelope working pressure: 0.2Mpa

Curing time: About 220 minutes

Tire Type: Suitable for all kinds of truck tire and OTR tire

Material : Steel

Capacity: 4tires, 6 tires, 8 tires ,10 tires, 12tires ....... 24tires

2.Customers’ region:

1.Middle east: Dubai (UAE) Iran Jordan

2.Southeast Asia: Indonesia India Pakistan Vietnam

3.Africa: Ethiopia Kenya Zambia Zimbabwe Egypt

4.America: America( invest in Armenia) Bolivia Brazil

5.Europe: Romania Ireland Slovenia Poland UK           

6.Asia: Russia Armenia Kazakhstan Mongolia

3.

Certification:CE

Technical Training: Offer technical training

After service:We can provide the service of installing machine

warranty period:One year

 

A.Brief Introduction of Equipments

Main equipments: JM-02 Gasification Tyre buffing Machine(a centrifugal dust collecting fan included),Cleaner, Liquid Rubber Stirring Machine, Rubber Extruding Machine, JTY-02 Tyre Pressing Machine(to process models 15″,16″,20″,22.5″), Envelope Spreader, Steel Ring Disassemble & Assemble Machine , Tyre Conveyor, Multifunctional Tyre Curing Chamber .

B.Tyre Processable

Processable models(650-1300) nylon cord tyre,steel wire tyre,( cold retreading technique of vacuum tyre , hole-reparing , belt .etc. )

 C.Workshop Requirement

1. Equipment Installation :sheltered cool and dry location.

2. Equipment is expected to be installed in stable ground to make sure the equipment is set firmly and safely .

3. Good ventilation . industrial power supply (380V--three phase power supply)

50 kw(vulcanisation chamber for 6 tyres),60 KW(vulcanisation chamber for 8 tyres )

4.Generally,the workshop for equipment installation can’t be less than 120 Square Meters ( 4-6 sets of equipments,150 Square Meters(8 sets of equipments)

5.Specific installation will be done under our technician ‘s guidance when they present the site .

D. Tyre Retreading Process

1.Inspection Choose the better tyre .The surface of the tyre must be intact , both the sides should not have oversize breakage 2. Drying Clean the tyre ,then dry it .

3.Buffing After drying,the tyre's original tread is mechanically removed on high speed buffers.Then people make second polishing and section repairs.4.Building-tread rubber The buffed tyre needs a thin layer of cushion gum to be wrapped around its crown area. The pre-cured tread rubber is then applied with the Tire Surface Press Fit Machine5. Enveloping The built tyre is then mounted with envelop and rim to prepare them for curing .6.Fixing steel ring After enveloping the tire, fix them on the felly on the working platform. And they are ready for being made vacuum and vulcanization.7. Curing WITH Curing Chamber The tyre is then placed in a pre-cure pot and pre-cured tread becomes adhered to the tyre through a curing process.8. Final inspection The retreaded tyre is subjected to a final inspection. This inspection insure that only tyres that meet industry qulity standards are allowed to leave the retread plant.

                 

The cold tire retreading machine-curing chamber